Homelite Consumer Products 4.0 Amp, 13 In. Trimmer "40 ratio stroke mixing" Questions

...200 ml or 2 stroke oil, that is the best result, used it on my chainsaw, strimmer, moped, working for years without a glitch. 50 to 1 is the ratio for most chainsaws,or if it fouls plugs,use 40 to ...

...40:1 ratio mix...that is 3.2oz oil/gallon of gas. A richer oil mix won't hurt either (say 20:1 (2X the oil of 40:1). I recommend synthetic always be used alongwith Stabil fuel treatment because after ...

...40:1 Ratio Mix. In that Chainsaw I used 50 to 1 Ratio with no problems. Today's Two Stroke Oils compared to Yesteryears are more Efficient at Lubricating. It is like comparing Today's Synthetic Motor ...

40:1 ratio in all my 2-stroke equipment. I use my equipment VERY HEAVY every day, and it consists of Stihl, poulon, John Deere, etc... Just don't go over 50:1, or under 32:1 and you should be fine

...believe for your motor it is 40:1. The commonest Ratios are about 5% (20:1) - 6% (17:1) and newer motors are usually 2% (50:1). I have also included 3% (32:1) because many tuned motors use this

...40:1 ratio would also work and that would about 3 1/4oz / gal. Anywhere in the middle will work just fine. Good luck 2.56 oz per gallon @ 50 to 1 mixture ratio Owner's manual is here: ...

  Gas mixture ratio is 40:1Be careful not to over add oil and or run it on straight gas the sparkplug will foul with too much oil, and overheat and seize the piston in the cylinder onstraight gas

...ratio you are using. Some Ryobis use a 32:1 mix and some use a 40:1 mix. There isn't much difference there. To be on the safe side, if you machine is possibly running or tuned a little "lean" I would ...

40:1 is the recommended ratio for this type of engine. If you cannot measure accurately you should tend towards more oil rather than less. That will protect your engine and the only downside will be a

what kind of petrol do I use in my lawn trimmer 2 stroke motor Regular unleaded gasoline mixed with a 40:1 ratio of 2 cyle oil.