Question about Pentair Pool & Spa
reading is 105 but heater is not running and will not run. How do I clear the reading? I'm assuming it won't start because it thinks the water is too hot.? minimax nt 250dv temp reading is 105
digital temperature read out cant get it the temperatuire read out to move down..seems stuck at 104 degrees Digital read out on what? The heater or the control system?What make model of heater is it
Question about Jandy Pool & Spa
jandy panel reads 89 degrees, sta rite heater panel reads the right temp 78. Jandy panel in the hose reads erroneously that the temp is 89 ... 94, Heater panel displays which appeares to ge the right ...
Pentair pool heater reads HI Pool heater wont work and reads HI thermister needs to be replaced. follow small yellow wires off control board to front header and thats where the thermister goes
but just in case. The display showing HI means that the heater is "reading" the water temp at over 114 degrees. This will go away if you change out the Thermister on the inlet manifold for the heater
...controls on the heater should be set to remote. If that is the case and it still gives no temp reading, it is the thermistor (temp sensor). it is very common for rats to chew through the
Pentair StaRite heater display reads "126" and won't turn off. After changing the thermister and resting power, display quickly read "r=5" then "126" which is where it is today. Display still won't ...
...reading the correct temperature, but the heater is not - you need to double check the temperature of the pool water with a standard pool thermometer. Other things to consider: 1) The water is ...
...Heater Mis-reading Temp. My pool heater (pentair mini-max nt) mis-reads the temperature. It says 85 on the red led display of the heater. But the remote reads 61 and the actual temp is 63 measure by ...
70 questions posted
Usually answered in minutes!
102 Questions
61 Questions
34 Questions
31 Questions