Ryobi Cultivator "card" Questions

...acceptable gap is .010"-.012". This is about the equivalent of the thickness of a standard business card. Once you are to the point of adjustment, fold the business card in half (with coil module ...

...and I am going to help you solve your problem. To set the gap for the coil, get a regular buisness card and use it as a feeler gauge, it just happens to be the standard thinkness for the gap. Loosen ...

...and coil. If you have to take the coil off to clean the contact points then use a 3x5 index card to put between the flywheel and the coil when you install the coil. The Magnet will pull the ...

...on you will have to double check the gap between the flywheel and the coil if you take a business card it should just fit between and should be a little snug. If the coil is off a little you will ...

...on them to keep them in storage ,the armature has a gap of 10 thousands you can use an index card to set these. when a spark plug gets rusted or anything, I first try to clean it up with ...

how to set time in my champion NO.: C82573-232 check flywheel key and air gap between flywheel and magneto 0.10 thousand of in. or use business card

back firing want start but will hit will not start but hits when you pour gas in card take carburetor off and clean real good maybe a kit while your in there. they are cheap. should solve the fuel ...

I need the spacing between the coil and flywheel. on tb144 about the thickness of a match book or business card is usually sufficient

...hp. tecumceh for a snowblower I was told that the distance was the thickness of a regular business card. Is that too close or should it be further away? hello, one business card or 0,008 to ...

GAP SETTING ON COIL i use a business card. all ways works. i don't know the exact setting but most people will use a business card