...Air Compressor, #921.153101 when it starts running it will get to about 40lbs of pressure and then will act as if it is bogging down and the motor really starts pulling. I had the capacitors checked ...
Question about Ingersoll Rand Air Tools & Compressors
...compressor. the motor as it is filling the tank, boggs down and up many times as the tank is being filled. The rep told me to change the valve on top of the tank but that did not work. The little ...
Question about Ingersoll Air Tools & Compressors
...air compressor bog down when it tries to fill A couple things may be going on. First I would tighten the drive belt. A lose belt will cause the symptoms described. If that does not take care of the ...
Question about Dewalt Air Tools & Compressors
...air filter removed, plug in compressor and feel intake port for strong suction. If the valve plate is bad, suction will decrease as pressure neers the 120 mark till the point of feeling that air is ...
...air is just blowing by the piston. Also check your connecting rod and wrist pin. Sometimes the bearing will blow out and not make the rod go completely up and down. Does the motor sound like it is ...
Question about Astro Air Tools & Compressors
...pump not working, so changed it. 3 days later, died while driving again, and had to manual prime to get it started.when put into drive, bogged down and stalled. next morning, couldn't start at all. ...
17 questions posted
Usually answered in minutes!
68 Questions
39 Questions