Dewalt DC925B Heavy Duty Xrp 18V Cordless Hammerdrill/Drill/Driver Bare Tool "torque settings drill chuck" Questions

...drill spins like it should when i pull the trigger, but when i grab the chuck or even lightly touch it, the chuck stops spinning. the motor and everything is still spinning because you can hear it. ...

...torque setting up to the maximum (the highest number, or the drill setting if it has one). If it still doesn't budge and you're not able to hold the chuck against the force of the drill, you may want ...

...settings I am assuming you are reffering to the torque setting on the transmission that is set by turning the numbered ring just behind the chuck on the drill.  The ring adjusts the torque where ...

torque setting, you can just hold the chuck with one hand and pull the trigger (put it in reverse), then change the bit and reverse your order of operations. once complete, increase the torque setting

...torque setting indicated on the dial before the chuck. Set the dial to the drill bit icon, or all the way past the highest number, and that locks out the torque control, and it will not ratchet I ...

How do I select torque setting? How do I select torque setting on a DeWalt cordless drill? the black ring behind the chuck, has numbers on it, turn to desired torque

...it wont budge. Try using the low torque setting on the drill when reversing and something to assist you getting a better grip to hold the chuck from spinning when reversing. This may help. Good ...

...of the torque setting indicated on the dial before the chuck. Set the dial to the drill bit icon, or all the way past the highest number, and that locks out the torque control, and it will not ...

...Torque settings now work Hammer now works. What happened? Should I be looking for a new drill, or maybe a new gearbox? It sounds like you were between gears. When you are in neither low or high, you ...

...torque settings. I do not have any torque measurement device. This said, what does each setting represent in terms of a torque value? Thanks for your help. Good luck finding any actual documentation ...