...DC925 cordless drill but I can not remove the old chuck. There is no screw and I tried tightening an allen wrench in the chuck and taping with a hammer. The chuck slips . I am replacing the chuck ...
what are the numbers around chuck used for? They refer to the relative tightness of the adjustable built in clutch. The lower the number, the less torque is applied before the clutch starts to slip. ...
clutch slips then try turning it to drill setting. Also try to do it in different speed settings. If not it sounds like a fault in the gear module. It might just be a metal clip just under the clip in
Question about Dewalt Drills
...DC925 works well but the torque settings don't seem to be working.when i am drilling screws the drill will just drill until i release the trigger.is this a clutch problem?. Many thanks. Try to put it ...
clutch slips reguardless of setting, in both drill and hammer mode. won't drill. is this a transmittion problem? You can get the part replaced with metal gearing and clutch and that shouldn't happen ...
29 questions posted
Usually answered in minutes!
227 Questions
165 Questions
118 Questions
74 Questions
