Question about Optoma Office Equipment & Supplies
...turn it on the fan starts but the bulb does not light up. The fan goes through a couple of high speed/low speed cycles and then stops and the red bulb light comes on. I thought it was the bulb the ...
Question about Optoma Office Equipment & Supplies
turn back on an it would run for a few an go out again so we put a new bulb in an reset the bulb timer an it still does it what do i need to do to it now i blowed it out too Hi, There is a chance that
Question about BenQ Office Equipment & Supplies
...turn on the lamp button starts flashing and will go into shutdown. If anyone has any ideas or suggestions I would appreciate them. Thanks Tom Hello! After 2 years I finnaly solved the problem. There ...
Question about IBM Office Equipment & Supplies
...Replace the lamp. Contact Technical Sup- port for repair if replacing the lamp does not solve the problem. Four (4) blinks The fan has failed. Contact Technical Sup- port for repair. Five (5) blinks ...
Question about InFocus Office Equipment & Supplies
...fan failure problem with Infocus ASK M3 / Proxima X350 is the replace the fans and check cables. Like the projector is saying 'One or more of the fans is not working ... ' so the cables or the fans ...
Question about Sanyo Office Equipment & Supplies
...be in good shape. * blew air through the unit while running using air compressor to rule out a bad fan * pressed the reset button during power up to reset processor. Not exacty sure on the reset ...
128 questions posted
Usually answered in minutes!
148 Questions
97 Questions
61 Questions
52 Questions
43 Questions