Kodak EasyShare C913 Digital Camera "set advance 2 button" Questions

...set the date and time at a later time.) 2 Go to step 4 below, Setting the date & time, anytime. Setting the date & time, anytime 1 Turn on the camera. Press the Menu button. 2 Press to ...

...2 photos. I tried with different sets of batteries and with/without the SD memory card. I also formatted the memory. It does not have a reset option in the menu... It's a Kodak Easyshare C913, ...

set the date and time Setting the Date, Time and Date Stamp: Use the following procedure to change the date and time setting. 1. Slide the Function switch to the capture mode. 2. Press the Mode button

...advance the number. 5. Repeat steps 3. and 4. to set each value. 6. Press the zoom out (three trees) button until the colon (in the hours:minutes) is flashing. When the colon stops flashing, date and ...

...set too slow....but I can't figure out how to change it. When I press by button 1/2 way down the number that flashes on my screen is 2"5....please please help me! Thanks in advance! don't get too far ...

...set it. Any ideas on where this is on my camera, since I don't have that 2nd tab? I just can't figure this out. I've tried the online manuals and the CD manual that came with my camera. I bought it ...

...taking mode, not review picture mode. 2) Press Video/Live Recording button. 3) Go to first option, called "Program" 4) In this mode, many other options are available, and there will be smaller

set to A for auto focus. Apparently, judging from this site, this is a common problem for this camera. I had mine in for cleaning overseas and they told me the lens was too advanced for the camera-but

...2. Select a picture using the right or left arrow buttons on the back of the camera. 3. Press the button with an icon of a trash can. 4. A menu comes up: Erase? Erase Cancel 5. Select "Erase", then ...

...advance Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this ...