peavey cs1000x amp fuse blown fuse blown Power amp transistors failure.
the light is not working and the bulb is not blown. These systems have many interlocks for safety. All doors must be closed completely. Also, there is usually a thermal fuse inside that may be blown. ...
something has blown? my marshall vs232 amp is a good few years old and i think it has blown! there was a slight bit of smoke coming out of it when it happened! the power LED comes on now but no sound ...
...to repair, or should I just buy a new one? Thank you Test the speaker itself. If the speaker is blown replace the speaker(s). If your has a volume control, I suspect the control may have blown. ...
Question about Behringer Music
...correct- but sound only comes from tweeter. What could it be? Step 1:Hate to say it, but possibly a blown speaker. To check this, do the following - Step 2:Insert headphones into jack to verify for ...
...About $6.50 from Digikey.com You will probably find one or both of the gate speedup diodes blown PN DL4148 surface mounted an one or more of the driver transistors 2SSA1020-Y and 2SC2655-Y ...
Question about Behringer Music
...Reading the instructions and trying different combinations of connections Your woofers are probably blown. To check plug a 1/4 inch or speakon into the speaker cabinet with the two bare wires exposed ...
...jackson 50 tube amp. Only slight sound comes out? Could be any number of reasons. Most likely is a blown speaker. Next likely is a blown tube. Check these first. If it's still not working, find a ...
...2 10's. Any ideas????? Another person posting on here I suggested opening his unit and he had blown speakers. I think these that are DOA after previous use may be blown during the previous ...
sp4 blown fuse blown fuse replacement It's not a fuse, it is a lamp and I suggest ordering replacements directly from Peavey.
214 questions posted
Usually answered in minutes!
108 Questions
85 Questions
69 Questions
32 Questions