Vtech CS5121 Cordless Phone "reset id unit handset" Questions

...id. Removed power from handset, plugged in battery and when the on button is pushed....display says connecting....., 4 secs later display says can't connect. Tried reset handset, reset base unit.... ...

ID number from the bottom of the new base unit. ? Press SELECT to accept the new code and complete re-registration. The handset is now registered to the new base. Hi well you do indeed have a problem,

ID again. This happens no mater which hand set I use, and I have tried each hand set and number of times. I have the manual, and have reset the base charger. Please help...what is the problem???? This

...unit should beep and show: (SYSTEM RESET) Deregister HS BaseUnavailible Useing the four-way key select "Base unavailable" and press the menu key The LCD display should then show : "Which Base?" Base ...

...unit or is out of sync with your messaging system. Reset Message indicator 1) Press and hold Find on the base for five seconds. Note: The handsets connected to the base will start to beep, however, ...

...ID & Slide Show. I can not view or add new photos to the slideshow. I pushed the reset button, but it didn't work this time. The screen now brightly lighted and blank. Can this be fix. Your help ...

reset is done by following the below steps: 1. Disconnect the battery from handset(s) 2. Disconnect Phone Cord from wall jack 3. Disconnect Phone cord from base unit 4. Disconnect AC adapter from wall

Reset" menu appears. Step 2: Choose the "base unavailable" menu, select "yes" and press the "OK" button. Goodluck, Please don't forget to rate the solution. It should be that you simply enter the base

...id & prgrm) and simoutaneusly pressing ez,intercom & 1 to reset. Also I tried unplugging power adapter for both the base unit and handheld (battery) for several hours to reset both. Nothing seems to ...

...Reset and it didn't help. no dial tone . you need to contact the phone company If it is flashing "searching" This usually means that the handset is not able to connect to the main Base unit connected ...