Troy Bilt 17 Inch 29 Cc Gas Powered Clutched Curve Shaft Trimmer #41ADT52C966 "spin trim lawn edger" Questions

we were trimming our grass and the line stopped spinning we were trimming our grass and it was working fine, then suddenly the line stopped turning, but the motor stil runs flex shaft most likely ...

The motor is working but the trimmer part stopped spinning. I checked the line but there is plenty, I removed and replaced the line spool but still not working. Does the trimmer head spin freely? If ...

Motor runs but base doesn't spin to do the trimming. How can I fix this? I have a Black & Decker 14 inch Grass hog- electric trimmer. I have a black and decker grass hog that won't turn. The motor

Motor spins, shaft does not... Was using the trimmer to trim grass, feed doesn't work, but that's another issue, anyhow, the motor kept going, but the shaft quit spinning. sounds like the cable has ...

...spin in a verticle sweep instead of parallel to ground). Just walk along sidewalk nad trim. You will have to hold tightly to keep the line straight (brace against your hip and try to make several ...

My troy bilt string trimmer runs great the head spins like it should, but my only problem is it stop cutting. What would cause a great operating weed eater to stop trimming? check the direction of the

...What needs to be done to lengthen the trim line? Troy Bilt Pony TB456 SS while the head is spinning press it down to the ground hard, more line should come

spin You may not have the drive shaft seated all the way into the power head. You will have to loosen up the drive shaft and push the shaft in but at the same time turning the trim head to fit it into

...its own after started when I haven't touched the throttle !! starts well,,runs well, the trim head spins on its own with the engine on..Is that normal? I lowered the idle a little and it did nothing ...

Homelite trimlite engine runs but head does not spin While trimming, the head stopped going around, while the engine continued to run Sounds like the inner flex shaft has broken, slacken the tube up ...