Peavey Pv 2600 Power Amplifier "volume pot" Questions

Ad

Question about Mackie Music

1 Answer

pot (volume control) is dirty. with a slider you can normally get fluid down the side of the knob, your's is a rotary control and you sometimes can do it round the shaft of the pot but more often have

Ad

volume dial off: it only plays one of the pickups and only when I push the toggle switch down. when the toggle is in the middle or top position there's no sound. Anyone have any suggestions and advice

Ad

...VOLUME POTS, but i don't know where to buy them, or the POT reference and spect to find a nice replacements. Thanks Usually with volume pots,the ratings dont matter. you can really buy then ...

Question about Fender Music

1 Answer

...volume pot is damaged. One other possibility is the soldering of a wire to the volume pot may be bad. If you are competent with a soldering iron you could replace the pot yourself or take it to a ...

...volume pot on a Gibson ES335.The best method for getting the old pot out of the guitar to enable it to be unsoldered and the new item to be soldered in it's place and put back into the guitar. If the ...

problems with tone pot and volume only works at full volume Pots are dirty or worn. Use an electrical control cleaner made for volume controls or have them replaced.

...volume pot on a rmx5050 volume control dirty,scratchy,seems to make ahiss on ch 2/ do i need to clean from from front with a spray and turning knobs/using a spray specified forthis type of volume ...

...volume pot just needs to be replaced. A good pot is worth about $5 and then you just need to solder it in. That tends to be the tricky part if you can't solder. It takes longer to heat up the iron ...

...volume pot, one tone pot, a three way toggle switch, and two humbuckers pickups. i took it apart last year and tried to put it back together but i dont think i wired it correctly. im thinking its the ...

Question about VOX Music

1 Answer

...volume pot is bad or soldering of it is bad. Vibration will make things come and go. Look for broken solder around the pot leads first. Then look for a cracked circuit trace on the board near the ...

Not finding what you are looking for?
Peavey Pv 2600 Power Amplifier Logo

97 questions posted

Ask a Question

Usually answered in minutes!

Top Peavey Music Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

Ngoro

Level 3 Expert

3523 Answers

Are you a Peavey Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...