...02: LSU trouble E7-10: Shading trouble (Black Correction) E7-11: Shading trouble (White Correction) E7-12: Shading Trouble E7-16: Abnormal laser output If it is a laser (LSU) issue then the LSU may ...
Question about Sharp Office Equipment & Supplies
02 Trouble memory clear 04 SPF counter clear 06 Paper feed counter clear 07 Drum counter clear 08 Copy counter clear 09 Printer counter clear 13 Scanner counter clear 14 SPF jam total counter clear 42
Question about Sharp Office Equipment & Supplies
13 ROM error 14 NVRAM error 15 Page memory fault 16 SIMM not present or installed incorectly 17 Page rotation error in RAM 80 Electronic sort board error 81 82 84 88 E7 03 Lens position error 04 White
Question about Konica Minolta Office Equipment & Supplies
13-02 A trouble detection signal is detected 2 consecutive times in 2 sec.after turning ON of M101 LT paper feed. F 13-03 An M6 trouble detection loop roller.If there is a paper in copying proces when
...02 Calibrate/Adjust (using Automatic Process)03 Power off and restart the printer04 Upgrade System Firmware05 Upgrade Driver or Computer Software06 Add Accessory07 Escalate08 Send Plot Again09 Wrong ...
02 ROM/RAM check, 03 auto feeder mode, 04 aging mode, 05 panel check mode, 06 G3 transmission, 07 check pattern, 08 product check (includes diags, 06, 03, 09), 09 signal send mode, 10 memory clear, 11
Question about HP PhotoSmart Office Equipment & Supplies
...02 Remove and re-install the cyan Toner Cartridge, then turn the printer off and on. Replace the cyan Toner Cartridge, then turn the printer off and on. Error 03 Remove and re-install the magenta ...
13 Memory Switch Settings. c. Press the DOWN arrow key 7 times and select #56 LCT Air Assist Fan; set it to ON. d. Press the Previous Screen 2 times. Note : To set the paper assist fans, access the 25
Question about HP PhotoSmart Office Equipment & Supplies
...02/13/2008, 100.000.233.000 Disconnect the printer or at least be sure it is turned off. I'd do both and reinstall the CD software program that came with the printer. When the software program asks ...
02: Y, xx=03: Y, xx=04: Bk.) Detail code: 0096 Description: Vd2 is 550 V or less. Possible cause: The Vd2 lower limit is reached Step 1 Checks: Is the setting of COPIER>ADJUST>V-CONT-M/C/ Y/K in
114 questions posted
Usually answered in minutes!
1,869 Questions
1,438 Questions
900 Questions
484 Questions
508 Questions