Question about Samsung LN Televison & Video
static fuzz effect on the screen and then shuts off (no shutoff sound). After a couple of clicks, it turns back on (making the tun on sound) to show the same picture and the process repeats itself. If
...plug is very simple. Also to expose the t-con board you will have to remove a heat shield cover. Once removed there is foil looking tape that needs to be peeled back to expose the board. The board is ...
Question about Televison & Video
...static shock and now there is no picture. The insignia label blinks from red to blue but there is no picture. I would like to try and fix this myself if I knew what part was needed. Thanks for your ...
...not start at same time. Sound had static first. Do a hard reset to this set, and check. Unplug it from AC mains Wall Socket, and re-plug it back after 30 minutes or so. This must make it a hard
...static noise occurs and the picture goes fuzzy and I can't turn the TV off by remote I have to unplug it from the wall. Once I plug it back in it's fine. You should check your home wiring and ...
...minutes (wait the full 5 minutes) -Unplug TV / Press top buttons 5 times each to remove static from system boards (yes, each button 5 times each) -Wait one full minute and plug TV in and press power ...
Question about Televison & Video
...static noise. When I unplug it and plug it in the tv turns on by itself and the snowy screen and load static are there. The remote control and controls on the screen will not work with this situation ...
Question about Televison & Video
...Static Discharge precautions (ESD)... A large percentage of "TCON" issues are merely "RE-SEAT" (un-plug... re-plug)... Notwithstanding... even with the low voltages in MODERN flat-screen TVs you can ...
...TV off for at least an hour, the static charge may have shorted the circuit board for the pront panel controlls. after an hour or so plug it back in to see if has reset itself hope this helps ...
...minutes (wait the full 5 minutes) -Unplug TV / Press top buttons 5 times each to remove static from system boards (yes, each button 5 times each) -Wait one full minute and plug TV in and press power ...
65 questions posted
Usually answered in minutes!
357 Questions
285 Questions
270 Questions
256 Questions
175 Questions