...power supply went bad, I replaced it with power supply from 46" TV. Image quality seems not as clear as before. Can it be because the power supply is from 46" TV? Check the power supply part no. ...
Question about Panasonic VIERA Televison & Video
...power supply issue - found a company that has used power supplies, they sell them for $60.00. We recommend a professional install the board because the voltage needs to be adjusted after the install ...
Question about Panasonic VIERA Televison & Video
...power supply and sometimes both. This would take a workshop repair and would probably be beyond economical repair if parts are available. Some people have been able to change the boards but I cannot ...
Question about Panasonic VIERA Televison & Video
...power supply, PN: BN44-00206A It's easy to locate, but requires adjustments once it is installed. Panel voltages must be adjusted according the the specifications of the TV. There is a sticker on the ...
Power Supply is replaced and the set comes back to life and operated with a Menu then you are probably ok. Note: On your set when replacing the SMPS the tech Must adjust the SMPS voltages to the Panel
...I think it cause by vs voltage is high. You can try to decrease the Vs voltage a little bit. You can adjust the voltage while the TV is on. The Vs voltage adjustment is locate in the power
Question about Pioneer Televison & Video
...power supply board, it is necessary and a must to adjust its Va & Vs voltages. These details will be there on its panel label. If you wish to get some details, check the site linked here. ...
...power supply board, the VS voltage is marked on the panel inside the set, find the VS test point and the VS adjustment potentiometer. adjust the voltage down at least 10 volts, if your not an ...
I decrease the vs voltage on my Vizio tv I take it you have a plasma? There are pots on the power supply board for adjusting VS and VA. Are you wanting to adjust the voltage due to red snow problems??
...adjust? All reading on the y-sus board alot of voltage adjustments at that high voltage are likely from another source that develops it like the the swith-mode power supply upstream on power supply ...
152 questions posted
Usually answered in minutes!
457 Questions
346 Questions
268 Questions
236 Questions
213 Questions