Panasonic Viera TH-50PZ80U Plasma TV "audio output" Questions

audio output jacks? In other words are the fixed or variable outputs? The internal TV speakers will be set to off. I do believe those audio outputs are fixed pre amp outputs that connect , for example

...output from the TV. You can use the analog L & R audio inputs for a very similar sound from the TV speakers. The digital multi-channel audio (Dolby Digital, THX, 5.1, 7.1, etc) encoded in the ...

...to a monitor s300 speaker The Audio output from a TV AV output is to low to drive a speaker, so you have to use a External Audio Amplifier to boost the Audio signal to be able to drive a

...audio output section circuit, or replace the audio output board, as card basis.If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. ...

sound from my TC P50U50 plasma tv Check the speakers first. If found OK, check and replace damaged component/s at it audio output circuit board, or replace the audio output circuit board as card basis

HOW TOO CONNECT AUDIO OUT? hi, u can connect the digital audio output (optical) to ur av receiver or any amplifier wich have a digital audio input(optica). ok

...it does not have fiber optique audio output but it can still work, for your dis net it all depends on what type of digital audio output is available , ill be honest with you this is a good job

...audio output jacks. But there's is only one digtal output jack! is this the jack ? and if it is, what cables do I need to make the headphones work? or am I forced into by an amplifier If you have a ...

...output. The cable has three audio video plug-ins colored red, yellow and white. Plug them into the TV's corresponding inputs. Turn on the television and change the input to the same one you plugged ...

...output which is what the composite standard is - yellow video composite red/white=stereo audio. You also say that you checked the wires, so you've seen the picture and heard the audio on AV2? So why ...