Sony Bravia KDL-40S4100 40 in. LCD TV "tv changing channel" Questions

TV? Can you type in a channel number and go to that channel? (this applies if the channel will not change with the buttons on the TV.) Try to rescan the channels (it could be that the TV has the other

changing channel it will come in static, move to another channel it is clear, move back tochannel where the static was and it is clear. this may happen several times a day and then may not do it again

...TV by changing to a DIGITAL cable channel -- stay on that channel for ten-twenty seconds -- then I switch back DIRECTLY to a HD channel (key in channel number directly on remote). TV works fine -- ...

...channel my tv needs to be on My tv screen is blue and I cant figure out what channel it needs to be on because it's hooked up to my direct tv but I can't see any of the channels can't seem to figure ...

...set your tv from the set up menu. then go to the channel set up and do the auto tune again. hope this will solve your problem. reset settings , untick =skip on channel 10,, auto tune compleletely ...

...TV has a built-in DVB-T tuner. Try executing a channel scan to pick up all available channels. On-screen menus go to Digital Setup, then Digital Tuning, you can auto-tune or manual tune channels. The ...

...changing the component input on the tv before the channel change and after 4 or 5 seconds switching to the correct component. Is there another way? I also have a Brand new Sony Bravia 52" LCD with ...

...TV to turn on with the "channel" as the HDMI-2 input (which is where my box is attached). I cannot change the on-timer channel to HDMI or HMDI-2 (or anything besides channel 2, since I don't have any ...

tv as froze on channel 44...it is set in the programs list and i cant remove it... Hi for some unknown reason my tv wont change channels....in the program list i cant remove channel 44 and this is the

channel changes, then the TV needs to be autoprogrammed. Using the SOny remote control, go into the MENU (or HOME on some Sony remotes), and look for the initial setup screen. It will walk you through