Question about Samsung LN Televison & Video
I have a Samsung ln52a650a LCD that won't turn on. When plugged in the standby LED is on and a relay clicks about once per second. The LED lamp blinks with the remote keys, but the TV will not turn on
no picture red led power light flashing on off i got the same problem in Samsung LNS4051D, it would not turn on and the power LED would blink 4 times and the relay would click and this would repeat ...
Question about Samsung LN Televison & Video
...clicking sound and the led light blinks but eventually comes on so far. When you are hearing clicking on the back of your TV turning it on or while its on, most likely you have problems with your ...
Question about Samsung LN Televison & Video
...turning off and back on u have bad capacitor on power supply , just look at the cap and u would see then blow hi i have lcd samsung tv ,power supply is ok and led blanking 4 time but not turn ...
...led 46 inch is not tur on but hear clicking no power and clicking usually is a power supply problem. Your power supply is clicking tring to turn on but its not. You will need to ...
...LED. There was continuous clicking of the relay and the red led also flashing non stop.' Power on 5V' line in the main board was short with ground. Replacing the main board solved the problem. I hope ...
...but no picture. I have to unplug it to get it to stop cycling. Is it a power supply problem? Yes,If LED power light keep flashing.If it go off and no pictture show up,than ur Main Tuner Signal board ...
Question about Samsung LN Televison & Video
32" Samsung TV, No Power or Sound, power LED on, flashes 3 times Hi there,I have a 32" Samsung CRT TV. When I turn it on, it makes the normal two clicks sound but them no picture or sound. The power ...
...clicking and the red led power light blinks 8 times. Help Hello, The problem is that there is a burnt or bad capacitor on the power supply board of the television, it is not longer responding, while ...
clicking and blinking red LED. Power on 5V line was short with the ground. I had to replace the main board in that case. I hope this will help. These blinks [flashes] are fault indication (Error Codes
467 questions posted
Usually answered in minutes!
285 Questions
270 Questions
256 Questions
175 Questions
155 Questions