Sony Bravia KDL-46V4100 46 in. LCD HDTV "led tv red screen" Questions

...led tv turns on 3 seconds shows picture than four red flashes plug it in red light on push power button red light goes off have to push power button again green light comes on for 3 or 4 seconds, a ...

...tv on only logo goes on and green led goes on but after a little while red led comes on 5 times there is no picture is all black do I have bad panel Or bad main board? If you're able to see the logo ...

led. Any thoughts on what the problem is? Thanks. This is a very common problems with LCD and Plasma tvs.The power supply board have dead leakagas capacitors.These dead capacitors they alway bulges up

...led tv My tv model is KDL 40EX520 Most common cause for this on the Sony KDL 40EX520 is that the connections to the screen across the top edge of the panel become loose causing blurred picture, ...

my sony tv has no picture or sound with a big red x on screen Check the LVDS connection cable for loose fittings at it sockets. http://electronicshelponline.blogspot.com/

...Tv remote sensor/board have no LED power light lite up might just be a lose connection or just a dead LED lamp only,because all the buttons on the remote sensor/board to the tv panel work wright?Try ...

...tv keeps switching itself off after just a minute !!!! I does show a flashing red led on the panel for a few seconds after an i am unable to find the users manual to give me an answer your help is ...

...red line off the left side of center of the screen? It runs vertical !!! HI if the line is temporary then re connect the cables in side the tv but the line is permeant then change the panel because ...

LED TV is showing a blank screen. How can I check my TVs backlight by using jumpers on the power board? I've seen videos to do this, but nothing specific to a similar Sony model. I've already replaced

...the power button and it makes a click like it is turning on but the screen won't turn on. What should I do? . The tv is in stand-by mode and the red power led is on. You must push a channel