...change input menu How do I remove the Antenna option from the Input Menu that appears when holding down the Input button on the remote. Most likely you can't. On some newer TVs you can skip the ...
Question about Sharp Televison & Video
input to accept an antenna for local? When i change channels it shows cable and then the channel #. Do I need to change that? If so how? TY TONS I asume that, depending on the model of TV, there could
Question about Polaroid Televison & Video
...and bandwidth will receive whatever signals there are available. You may have to change the input source via your set's menu so it is looking at the antenna input; it may be set to cable
Question about LG Televison & Video
...change the input mode on my LG 50pq60d. its in antenna mode and will not change to av cant access input mode by going into menu bar or pressing side input button. cannot factory reset either. I think ...
...input Hi, Change video source by pressing Input button and select TV, make sure antenna is connected in RF In jack in tv then go to Tuning menu and select Auto Tuning/ Auto Scan option, tv will tune ...
...input. If you use a digital OTA antenna, the signal must first go through a digital converter or tuner before it goes into the DTV input. The DTV/ANT input is only cable ready. There is no digital ...
change. However, when I switch the PIP to Video 1 and swap the main picture with the subpicture, the channel changer for the subpicture works. THE PIP CHANNEL CHANGER ON THE REMOTE ONLY WORKS WHEN THE
...input set to TV, press Menu. Select the Channel submenu and press Enter or down arrow. Set the TV mode to Antenna (use the left/right arrows to change the value). Then press the up/down arrows to ...
161 questions posted
Usually answered in minutes!
222 Questions
140 Questions
101 Questions
92 Questions
78 Questions