Alpine iDA-X200 Car CD/ MP3 Player "error dc" Questions

...DC error on my alpine cde-102 head i am getting a DC error on my alpine cde-102 head unit what is it how do i fix it Hello christo12385, The DC error is most likely caused by a shorted or grounded ...

...dc/dc error @ high volume When i turn up the radio past half way it reads dc/dc error n wont display anything but that. only way to get it to go away is to power the deck back down more than likely ...

DC error message I keep getting a "DC error" message on my in dash radio. I have an alpine. tonite while driving on a bumpy road i had the dc error right after a big bump. according to user manual, ...

...dc error , hold preset 1 fpor a couple of secomds then hold preset 2 for a couple of seconds , then display should show dc1 - ok / dc 2 - 0 , then connect speakers one at a time , check wiring ,this ...

Radio and CD player alpine says error dcc The message "DC ERROR" means that Power Supply IC of head unit is damaged.

i have a alpine cda-105 and out of no where it started to show dc error what does that mean? Get a bigger car battery and restart the head unit

miswiring dc offset error comes on my radio and it wont play That means a speaker is shorted or the wire for the speaker has come in contact with the chassis of the vehicle.

...error ocurred when the laser or dc are dirty..but now the E-02 appears always i insert the cd..i hope somebody give me an answer please..i don´t know what to do!! thanks!! Message Possible cause ...

DC offset voltage detected at the speaker terminals ('+' and '-'). This is normally caused by connecting a '+' or '-' speaker wire to either GND or Vcc (+12V). 1. Collect cable not being used and make

...DC ERROR" appears on the screen. I turned the unit off, pulled the face plate and pushed the reset but still the same problem. une or more speakers wires are touching ground or is in short... after ...