Question about Pioneer Car Audio & Video
...speaker wire. Check the wiring at the back for pinched spots or missing insulation. You can also try disconnecting all the speakers, then re-connecting them one at a time to see which one is ...
...Check each speaker lead for a short circuit, damaged speaker or a ground to chassis. Basically means one set (or more) of the speaker leads are touching each other (shorting out). This can be ...
...amp and sends it into protect mode, shutting down the amplifier section while the rest of the unit continues to work. Check your Factory speaker locations for blown speakers or bare wires to
...i had the dc error right after a big bump. according to user manual, one of your speakers connector got lose and is touching the metal body of the car giving a shortcut -> check your speakers ...
...or speaker with low impedence is hooked to the internal amp and sends it into protect mode, shutting down the amplifier section while the rest of the unit continues to work. check all of your ...
...check if any of the speaker wires are touching the ground. This is a safe guard error message indicating a short. Please check on the wiring/ the harness, disconnect one by one to see if the error ...
Question about Clarion Car Audio & Video
...Check your speaker output wires - if they are shorted together that will cause the head unit's internal amp to go into a protection mode like that. i had this problem, checking the wire stopped it, ...
Question about JVC Car Audio & Video
...speaker wire. Check that the terminal leads for the speakers are properly covered in insulating tape. Check the rest of your wiring, if you can, to check for any section where the insulation is worn ...
...speaker lines and power on the set for confrimation. check in power/auxially circuits in the set. it is possible that your mechanism drive / audio output drive Ic's could have shorted. Most of these ...
Question about Clarion Car Audio & Video
...Check each speaker lead for a short circuit, damaged speaker or a ground to chassis. Basically means one set (or more) of the speaker leads are touching each other (shorting out). This can be ...
30 questions posted
Usually answered in minutes!
114 Questions
80 Questions
69 Questions
73 Questions
63 Questions