Question about Mitsubishi Office Equipment & Supplies
...blinking red and green? When I turn on the projector, the indicator lights turn green. After a few seconds, you hear a click and the status light blinks red and the power light blinks red and green. ...
Question about InFocus Office Equipment & Supplies
...blinking red - is not so good For dual-lamp projectors, one blink off every 2 seconds means the problem is with lamp #1; two blinks off every 2 seconds means the problem is with lamp #2. So how many ...
Question about NEC Office Equipment & Supplies
red is still blinking on the 6 cycle. Is the projector receiving a source signal? if not it will power itself down after whatever time you have it set to do so when no signal is present. Just an idea?
Question about InFocus Office Equipment & Supplies
stops working and the red light starts blinking and the green light turns off. Then it goes to what I described in the first sentence. sounds like one of the 3 fans inside the projector is not working
...projectors total seeing the issue. Turn projector on, green power light, blinking green lamp light. After several minutes the lamp light will turn red and the power light blinks green and eventually ...
Question about Sharp Office Equipment & Supplies
...the bulb light is green by blinks in the following sequence: 1 long, 14 short. Do you know what this means? Replace the new lamp, Green few seconds indicator blinks and then red indicator ...
...projectors lamp LED would blink red and then after a moment the power and lamp LED would stay on solid RED. lamp duration hitachi cprx 78 lcd projector all leds blink in red when i switch on the ...
Question about Mitsubishi Office Equipment & Supplies
Power and status lights seem to be blinking a code that is not in the manual. status light blinks 4 green to 1 red, while the power light blinks 1 green to 1 red. Lamp cover?
Question about Sharp Office Equipment & Supplies
...blinking red, and power light blinks green. Finally, both lights go red, and projector does a bit of cooling, and reverts to standby. Lamp use was approx 400-450 hrs at this point. What is wrong? I ...
...blinking red when we press power button on projector intial it apperas green after almost 1 min. power light blinks red and projector is not focusing the after repeating so many times problem is same ...
39 questions posted
Usually answered in minutes!
21 Questions
23 Questions
30 Questions
15 Questions
22 Questions
