Question about Technics Audio Players & Recorders
...work but no sound at all comes from speakers. Could you advise? Thanks This could be either a fault on the headphone socket itself, or on a speaker switch. It depends on how the insertion of
Panasonic stereo SA-PM28 displays fault code F61 then switches off Hi dearnley1 The error code your unit is presenting relates to either a speaker cabling fault or a fault speaker. Sometimes, it is ...
...channel is crackly. Audio on front left speaker is very crackly with reduced sound output. Have fault found speakers and cables, fault is definitely the SR7300 Amp. A couple of techo taps on top ...
Question about Teac Audio Players & Recorders
...power and turns off 2nd set of speakers??? Here are some things toy can check and try. Connection faults -- Check the speaker cables for shorts or damage. Crossing speaker wires can destroy ...
Question about Sony Audio Players & Recorders
...open no sound but starts up ! then says protector push power Protect mode will kicking whenever a fault is detected. Causes that can start protect mode are: Electrostatic harges on internal
Question about Nakamichi Audio Players & Recorders
...problem, or the rotation of one of the reels is stopping for some reason. Most of the time, these faults are mechanical. There can be worn belts, or drive wheels, or gears, and etc. Sometimes there ...
...going out. HelloThe output stage circuit of your Pioneer should be checked well to detect this fault. As sound output comes right at first, and it goes of intermittently, distorted and ...
Push Power Protector displaying in panal It is possible that the amplifier had encountered a fault with a higher current drain which had triggered it to a protection fault condition. The fault can be ...
I have a Motorola DCP 501 Everything seems to work except the clip type speaker hook-ups no faults displayed Hello There are Center Speakers, Surround Speakers[L&R] and Front speakers[L&R]. ...
it wont work It is possible that the amplifier had encountered a fault with a higher current drain which had triggered it to a protection fault condition. The fault can be your output drivers- the ...
79 questions posted
Usually answered in minutes!
169 Questions
146 Questions
83 Questions
90 Questions
66 Questions