Cuisinart CPM-900 Popcorn Maker "turn" Questions

motor turns but gears seam to be slipping motor is running but stirrer in kettle does not turn therefore popcorn burns I would look for screw that has loose up and that's proablly why the stirrer will

...FOR MY KPM-508 POPCORN POPPER The instructions say make sure kettle motor is plugged in. Turn unit ON with switch on crown of machine. Allow unit to run for 3-5 minutes to heat up kettle. ...

Ccp600 stops turning when popping The popper turns the seeds and then it shakes then it stops turning and the popcorn gets stuck inside. Check in this order. -popping with oil, you can not dry pop. ...

drum turns and turns. only burns the kernals doesn't pop them If the drum is turning, then it should work. Are you putting enough oil in the pot? Make sure you let it heat the oil for a little bit ...

Turn Style plastic broke The plastic piece that is on the top of the case that the kettle rests in after you dump out the popcorn has broken or melted. Either way the kettle now rocks back and forth ...

Pop corn doesn't pop Is it the popcorn or the machine? A few kernels pop and the rest turn brown and the machine shuts off after waiting and waiting. I've tried several kinds of popcorn even put some ...

when turning agitator on it gets jammed in the spur gear. This is a hard symptom to troubleshoot, it can have many different causes. 1. Is the stire wire in the kettle straight and spinning freely? 2.

...in the top of the machine should rotate the gear sticking out of the top of the cabinet when you turn the switch on. This gear should connect with a gear on the top of the shaft that sticks out of ...

well pump pump runnning on and off, pressure goes to 90 psi then drops rapidly to 30psi to turn on pump this happens any time water in house is turned on i bougth mini jet star popcorn machine in a ...

Why my new microwave turns on when first plugged in? If it turns on when plugged in try hitting the off/stop button after plugging it in. If it is an analog knob make sure it is in the off position ...