Question about Simpson Washing Machines
agitator out. I have Simpson top load washing machine eziset 550 5.5kg model no. 36S550L. I haven't use the washing machine after the shoelace stuck down there. I'm not sure if I just cut the shoelace
...machine agitator Before trying to remove the agitator, first try untwisting the stuck clothing. Figure out the direction in which the agitator spins (usually the direction in which it is easy to turn ...
machine GLWS1649ASO wont spin on spin cycle. motor and pulley turn, but belt doesn't move. Is it the belt? no it will not be the belt more so it will be a bad transmission.or something stuck under the
...my heavy duty kenmore washing machine. How do I get the agitator off? unscrew the agitator from it's base, just hold the shaft with a pair of plyers and turn agitator.(you will have to take case
Question about Washing Machines
...stuck under agitator out? mattress cover stuck under agitator can't ge it unstuck. I tried pulling aand tried untwisting it and it wont budge On the older machines, the cap on top of the agitator ...
...machine acts like it starts in the middle of the fill cycle. it is supposed to fill, determine the load size then start agitating. instead the agitator starts right away and after the cycle is done ...
machine is agitating slowly. You need to either tighten the belt, or replace it. Make sure you don't tighten the belt too tight. Good luck. Hello & Welcome to FixYa I don't think it has to
The washer gets stuck in the agitate cycle. The washer fills and starts wash, but gets stuck agitating between the 14 minute and 10 minute marks of the ''Ultra Clean'' cycle. The washer keeps ...
Question about GE Washing Machines
Machine -- Agitator will not cycle Clothes come out full of soap. Stuck piece of wood in lid switch so that cycles could be monitored: Machine fills, then agitator tries to move, but appears to jam, -
Question about Kenmore Washing Machines
...stuck in the spinning cycle. I again either agitate the machine or rerun the last cycle. Then sometimes the machine runs completely fine. Sounds like the timer has failed. It's a common problem. Part ...
68 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: