Panasonic Kenmore Canister Vacuum Vacuum "remove cover whispertone" Questions

cover removed remove the (2) access screws. Now you will be able lift of the entire top cover from the base. You will then see the belt and roller brush, remove the old belt and replace with a new one

...cover over the light, push in on the sides to release the tabs, then remove 2 screws. Using a screw driver, put it in the slot, one on each side, from the bottom, pry up to release the tabs, cover ...

...REMOVE COVER ON BEATER BAR TO REPLACE BELT? Hi There, Here's a link to a repair that I've already posted on Fixya on how to replace the belt on your Kenmore Whispertone. This should help you out ...

...from the motor cover. Don't worry, it is disigned to do this and will not break but it may require a little force. A long phillip-head screw driver will be needed to access and remove each ...

...force. A long phillip-head screw driver will be needed to access and remove each screw. Good luck. - Gary Have Kenmore Vac Mdl# 116.27085790. ac cord will not retrack, how do I get the cover

...Whispertone Kenmore 23313. Wheneve I use it, it smells really bad - like burning rubber. Do you think the belt needs replacing or is there something wrong with the motor. It seems to have a vacuum, ...

...cover over the moter and cord reel. Remove the 2 screw and put up and out. I have a Kenmore 116.26512690, and I can't see a way to remove the cord release, so that I can get to the two screws beneath ...

...cover is off, you will see two screws. Remove those two screws. Now simply grab each side of the cover towards the bottom and back of the nozzle and pull out. This should release it from the base. It ...

...REMOVE BOTTOM TO GET TO IT KENMORE WISPERTONE 116 The top cover to the light lense pops off at the ends. When you get that cover off then you will see 2 screws that are by the swivel neck. Take those ...

...remove the pedal, rotate the pedal up in the same direction as the spring is pushing and it should come free from the motor compartment cover at which point you can access the other two screws. I ...