Panasonic Kenmore Canister Vacuum Vacuum "open vaccume motor" Questions

Ad

...motor.I open it to see, thats why I know.The vaccum cleaner is practicaly new I hardly use it please help. if it were m i would take it back and insit on a new one.something new shouldn't have to be ...

Ad

...open the motor of vassum cleaner ....how i want to open the motor of vaccum cleaner ....how can i do it...??...if any repair manual available....plz send me the link...... let me know what kind of ...

Ad

Question about Vacuums

1 Answer

...open the motor and clean it with a small paint brush. Clean also the filter bag. Dust will cause hindrance to the motor vacuuming power. Apply oil or grease to moving parts, not too much just enough ...

...at the end of the hose and check the receptacle and see if it is sitting flush with the plastic opening that it sits in. If it is pushed back, that's your problem. Also check the re-set breaker

Question about Oreck Vacuums

1 Answer

orek founder vaccum has no power Orek Founder series vaccum will not turn on whatsoever Start with opening up the handle on your vacuum. It may be as simple as one of the wires has come off of the ...

...motor and the vaccum pump that has come off or broken? How can I get at it, if this is the case? Hi, Yes this could be a case due to which there is no suction. I am posting an article which gives you ...

...is "kaput" or some wire got loose somewhere. When motor burns it usually stinks pretty bad. You have to open it up to see and test. We can do it for you but you'd have to ship it here.Se ...

Question about Fantom Vacums Vacuums

2 Answers

...open, the motor should rev freely, when blocked it will slow and sound labored / loaded down. Another possible cause could be a binding brush roller overloading the motor - but this will usually burn ...

Question about Dirt Devil Vacuums

1 Answer

...open the motor housing,there are 4 screws 2 on the front side and 2 on the bach side that will expose the motor and the cord.take out the old cord and splice in the new one.then put it all back ...

...is a safety switch there that may not ne engaged. Cord may be bad, one side of the line may be open. Noozle asm. not on straight, there is another safety switch there. Problem with switch or

Not finding what you are looking for?
Panasonic Kenmore Canister Vacuum Vacuum Logo

23 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Vacuums Experts

Brad Brown

Level 3 Expert

19187 Answers

Cindy Wells

Level 3 Expert

6688 Answers

john h

Level 3 Expert

29494 Answers

Are you a Panasonic Vacuum Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...