cord from the end of the machine with a dry cloth and some furniture polish. This will clean the cord and add some resistance to the retractor that could minimise the cord flowing back into the vacuum
Question about Kenmore Vacuums
...retractor not holding cord when pulled out to any specific length. Always wants to pull the cord back into housing. Would like to open the housing to see what might be wrong, but without a Owner's ...
...cord retractor/switch assembly? there is only one screw that appears to hold the piece but it does not come out, Thanks There are 7 torx head screws to remove in the top plastic housing. 5 are in the ...
Question about Kenmore Vacuums
...cord-retractor-foot-pedal on the top back of the canister. To access these screws the pedal must be removed. To do this, press the pedal down and look (from the top) for the four plastic clips that ...
...cord-retractor-foot-pedal on the top back of the canister. To access these screws the pedal must be removed. To do this, press the pedal down and look (from the top) for the four plastic clips that ...
23 questions posted
Usually answered in minutes!
4 Questions
15 Questions
5 Questions
2 Questions
7 Questions