Carrier XHB123D X/Y Series Heat/Cool Air Conditioner "wiring limit switch diagram" Questions

limit switch. I'll have to get a wiring diagram of this unit. See if you can follow the wires from the wires from the limit switch and see if they go to another limit switch. Also you can put a jumper

...furnace the overload limit switch keeps shutting off the power. Is this a problem with the switch or the furnace itself? What should I check for?. Here is the service manual with wiring

...limit switch is also faded. If you can find the wiring diagram pasted on one of the panels you may find the model number printed on it. Even if there are a few different numbers on it, most parts for ...

...limit switch is open and i was told that it could be reset. I can not find the swith to reset it. Look at the wiring diagram on the reverse side of the front panel. It will indicate what color the ...

...limit switch. If your unit has an LED light, count the flashes and it will hepl popint out the problem. (locate the wiring diagram/flash code list, and correspond the flash count, with the code.) ...

...wiring diagram) That unit is very small with every component within 3 feet of the pigtail/power cord. A electric heater has heat strip/s a switch and 2 thermal limiting devices, 1 auto resetting, the ...

...wiring diagram and the End Switch leads me to some sort of combustion air or exhast air motor for the combustion chamber... What do I do now? The motor is always running when the unit is on.... This ...

goes into wait and stays like that. It is a braemar te430. Any ideas? Sounds like the limit or fa switch. To be sure which one, e- mail the manufacture for wiring diagram or specs. Thank-you-very-much

...hours of operation. No problem with the burner system. Wire diagrams and safety switch information would be helpful. Query, possible motor overload problem? Thank you. Patrick high limit sensor ...

...is flashing a code, Check your limit switches to see if one is open, Does your blower motor run all time? could be a board problem. You should have a wiring diagram on the inside of the electrical ...