Maytag Appliances Over-the-Range Microwave Oven "slipping turntable" Questions

Lost glass turntable support wheel I am wondering if I can buy just the wheel that has come off the glass turntable support or if I have to purchase the whole turntable support piece and if that is ...

microwave turntable not turning The solution is very simple. Unplug the microwave first. Remove the round dish. Remove the circular riing with the rollers and set aside with the dish. Carefully with a

...the items turns with the turntable removed. If it does then (and if it is belt driven) the belt may be worn and slipping. Anyway you look at it the cover has to come off to see what is

...STOPPED TURNING On some microwaves there are several drive rollers under the turntable. It's possible that these are slipping due to dirt build up. Try removing the turntable and clean the

Turntable will not rotate On some microwaves there is an arm with 3 rubber rollers on it on the underside of the turntable. Check these aren't dirty and slipping.

My Whirlpool Whirlpool microwave table does not turn Usually indicates a bad turntable motor (accessable from the bottom of the microwave oven), but sometimes (in some cases) the turntable shaft ...

Turntable The turntable in the microwave doesn't rotate, or at best, rotates slowly. There's a small turntable motor under the bottom panel of the oven. You can access it by removing the series of ...

turntable doesn't work Remove turntable. It is possible that the rollers on the driving arm underneath have become dirty and are slipping on the underside of the turntable

turntable drive coupling or a sluggish motor. The coupling has a D shaped hole inside to keep it from Slipping on the shaft, so Try to turn the coupling by hand, if you feel it slip or it is very easy

Can anyone explain why the glass turntable has stopped rotating. Everything else is ok. Check whether there are rubber drive rollers under the turntable. These can become dirty and slip.