Linksys WRT54G2 Wireless Router "solid light" Questions

...and WLAN light are on solid, the router is fully rebooted. A working router should show solid green power light. upgrade the firmware of the router. If this Helped you-Rate me..Thanks for Using ...

...light is solid. If not then try to reset the router again. do the same thing and check if the power light is solid. If the power light is solid then you will need to set up the router again. If the ...

...light to shine solid. I don't know if this is a random manufacturer problem with just my WRT300N (V1.1) or if others may have a similar defect, but it's certainly worth a try! Good Luck! Normally, ...

light should be solid. The ethernet light does not need to be solid, and the Act or activity light should be blinking, Now go to the command prompt and type in > ipconfig /all. you should get a WAN ip

...internet light is on solid. There is also a high pitched noise coming from the router. How do I reset it? You can find a reset on the router. Press and hold it using a pen and release after 30

My linksys WRT300N router is Not working. The lights are all solid and it wont reset. Please help Hi, we can hard reset the router for about a minute, powerlight should be blinking the moment we reset

...light willl be solid on the router. Once the power is solid and steady, unplug the power cable of the router. wait for 5 seconds and plug it back in. When you reset the router, it will come back to ...

...light willl be solid on the router. Once the power is solid and steady, unplug the power cable of the router. wait for 5 seconds and plug it back in. When you reset the router, it will come back to ...

lights, this indicates that might be a hardware problem on your linksys router. A working router should show solid green power light. You may still resolve this by upgrading the firmware of the router

...light willl be solid on the router. Once the power is solid and steady, unplug the power cable of the router. wait for 5 seconds and plug it back in. When you reset the router, it will come back to ...