locked!. I took the card out and saw that the lock switch is not on.. still doing it The lock/unlock tab may be getting moved to lock when inserting into the slot of the camera, and then moving to the
...locked before inserting it in the camera. What to do? Put a small piece of tape over the switch on the card and re-insert it. If the camera now functions properly, the "feeler" in the camera may be ...
...locked position during the insertion process, you could place a small amount of tape along the card edge - over the tab - and carefully insert the card again. You might have to remove some tape to ...
the memory card is locked Taped side hole and switch in up position...I think unlocked. Still says card is locked. you need to put memory card into computer and format it. your computer should pick up
Question about Canon PowerShot Cameras
...message when card is in unlocked position? New card same problem but neither card is locked. both are fully in unblocked position use a peice of tape to make sure it doesnt move when you install ...
...locked. take out the memory card look on the left hand side of it and it might say in little letters lock and theres a little thing that moves up and down and then move it the other way to lock or ...
Question about Canon PowerShot Cameras
cover itself but the small L-shaped plastic hook on the camera base that got broken. Use electrical tape for holding the door or you need to visit service center for replacing the complete door
...locked+its not the camera as other memory cards work in it, i've moved the little plastic tab up+down+applied tape, but nothing has worked, HELP!!!! If the memory card truly is bad, then download any ...
...locked" postion? Hi, This used to happen occassionaly with my canon camers. Just use a peice of scotch tape or if you have one a small dab of hot glue to stop it from sliding. Hope this helps FixYa, ...
...locked This is nearly always an indication of an issue with the memory card, not the camera. I have had a similar problem with flimsy lock tabs on memory cards myself. I solved it by placing a small ...
495 questions posted
Usually answered in minutes!
944 Questions
808 Questions
687 Questions
597 Questions
590 Questions