Bunn BT10B Coffee Maker "top matic machine problems" Questions

top on the water tank. two white wires go to the tank warmer and two wires go to the tank heater inside. you can try turning up the thermostat setting to a higher range and see what happens. there's a

...problems. Please Help Me!! all bunn-o-matics have a cleaning spring that goes into the water tube once you unscrew the sprayhead. if you want to take the unit apart go this route. unplug the unit. ...

...Matic VPR? The machine needed a good cleaning so I went to it. Half way through I realized I should have taken some pictures so I could identify the wires and get them put in the right place. The VPR ...

...to start, but then is cool, or cold when you brew. The main heater in the tank, goes in from the top. Could you do this? well, there are 2 other items, a thermostat, and a hi limit that can cause ...

...may be able to solve the problem. The may be an indication that something is plugged up. Open the top of the unit and in one of the corners you should find a water filter stick or column that is ...

...matic that I thought was leaking from the bottom. Upon close inspection, I found that it was leaking from the worn out washers located on the top of the tank, allowing water to run down the sides of ...

...top and lift it off. You will see the rocker leaver that allows the water to flow into the tank. At the point where the rocker stops the water there is a series of washers that degrade from the heat ...