John Deere D140 48 in. 22 HP Front-Engine Riding Mower "adjust mower deck jd" Questions

Mower deck drags on right side. Mower height adjuster doesnt work seems jammed. Scrapped over a 2x4 right side. Deck dropped on right side to zero height. Have a look underneath while someone operates

...mower deck? It runs fine when you disengage the mower deck. It's the safety system that causes this. There is a switch under the seat that should activate when you are sitting in the seat. The switch ...

...mower the belt that runs the cutting blades has come off and i need to see a diagram toloop it correctly through all the wheels. jd lt 166 has 5 different decks 3 of which have the same belt routing ...

jd lx188 deck wont lock down Check lock down for loose nuts and etc. May need a little adjustment.

...JD GT 262 what lever / button do I press to engage the deck? Thank you. There is either a yellow toggle switch or a yellow knob type switch on the dash panel that will engage your deck unless some of ...

...mower deck pins and slide out of the way. Pull linkage pin out then turn clockwise one full turn .move brake pedal while looking at it .You should see a small brake disc on side of rearend with a nut ...

...JD L110 motor still turns the blade/belt when I turn the blade lever to the off position. It then throws off the belt from its pulleys... very not good! Sounds like you may have a stretched belt for ...

...starter? Iam perplexed. I have a 17.5 lawn tractor from sears. JD You likely need to get the valves adjusted,it sounds like the decompressor is not working.You need to get the compression down to 130 ...

JD riding mower that is 4-5 years old. hard to crank but will start. will not throttle up and very weak. makes a poping sound and is blowing back through the intake. gas filters and carbarator look to

...adjust or what is causing problem. if it is an electric clutch system, it could be low power to the magnets for the clutch or worn/ wet plates of the clutch With no make or model number I will talk ...