Euro-Pro Shark GI490 Iron "rubber plate" Questions

Ad

Question about Rowenta Irons

3 Answers

plate. This will make the rubber gasket surface become hard and no longer seak to the team chamber, resulting in water leaking from the tank onto the outside of the iron. If you are reasonably skilled

Ad

Question about Black & Decker Irons

1 Answer

rubber burned onto plate of iron The iron tipped over onto a cable cord and now there are several spots of the burned on black rubber stuck on the surface of the iron plate. It is a The Classic Black

Ad

Question about Kenmore Irons

1 Answer

...found that when I replugged it in the ordor was coming from between the plate and plastic...smells just like hot wires. REPLACE POWER CORD ITS MOST LIKELY WORN BY THE HANDLE WHERE THE RUBBER BOOT ...

Question about Euro-Pro Irons

1 Answer

plate where the cord attaches to the iron... there are 4 screws visible and another 2 screws hidden under the two rubber feet...These are joined together by a rubber strip and can be removed by prying

Question about Euro-Pro Irons

1 Answer

...Please call me at 815-814-0912 or on our email address at [email protected] Thank you Emmett Fleming pry off the rubber feet on bottom of the plate there two screw hiding under rubber ...

...rubber grommet that lives between the water tank and the heating plate chamber. If the iron was dropped, this grommet might have become disloged. Another possibility is that there is a problem with ...

...on my iron. Where are the screws to start taking it apart? Can you please provide direction for disassembly six screws on bottom plate two hidden under rubber feet on bottom under lower screw ...

Question about Rival Irons

1 Answer

...rubber gasket around the hole that lets water move from the reservoir to the heating plate. The two surfaces (reservoir and plate) are held together by screws, which compresses and seals the gasket. ...

Question about Irons

2 Answers

plate and is secured by a circular disc with fingers in the center that push up when they slide it on and one must open these fingers up, unuslly one will do so it will release. If you try to force it

...three screws into the metal bottom plate. Remove these three screws (on in front, 2 in back)." ..posted by FixinIsGreen Check those rubber seals and silicone and suggested erir if you find a ...

Not finding what you are looking for?
Euro-Pro Shark GI490 Iron Logo

289 questions posted

Ask a Question

Usually answered in minutes!

Top Euro-Pro Irons Experts

Brad Brown

Level 3 Expert

19187 Answers

NOEL
NOEL

Level 3 Expert

8606 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66772 Answers

Are you an Euro-Pro Iron Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...