Crown CE1000 2-Channel Amplifier "channels missing" Questions

channels have noticeably less gain and I have to boost them considerably. This mixer is about 4 years old. What am I missing? use good brand contact cleaner from radio shack or other electronics store

...back by re inserting the phono plugs. And I have a CD which almost always gives sound in both channels. (Joe Henry: ''Fuse'') Otherwise, it's hit and miss. Well, if messing with the RCA cables ...

...missing?? The good news is that you have one channel working. This means that since stereo amps are just two mono amps joined together, you can use the other channel as a guide to what the other ...

the right channel is not working. I have replaced the power I.C. for this channel, but it didn't fix it. From further testing, I think that the signal level into this I.C. may be missing. Perhaps the ...

One channel missing at switch on. Can be recovered by switch off, or A/B switch Could be caused by a dirty or faulty switch. Perhaps even a bad soldering joint? Servisol Switch Cleaner sprayed on ...

just wanted to know what switches ( which number's ) i push across on the back of my amp to bridge it so that i can get the full 2000 watts out of one channel..... my owners manual is missing so i ...

carverm1.0thad 2 blown caps c401 an c402 replaced amp comes on but only half the rail volts hum in right channel low output left cannot find colprut can you help thx ed @just-audio.com ive checked ...

NAD C350, everything works after i replaced many blown parts except it has no sound output from any channel, just need some ideas on what to check for faults. thanks With no background on the original

little sound, only when wolume is up high. either the adapter links are missing on the back or the tape monitor switch is pressed in

I only have left channel on speakers working have tested speakers ok, swapped pre amp boards still one channel, swapped output boards the same. What could it be? Barry is there Sound stage output is ...