Crown CE1000 2-Channel Amplifier "anything" Questions

...from the switch on front. The other one powers on as soon as I plug it in. The switch does not do anything. How do I change it so that the switch will power it on and off? When you buy anything

static i am getting static through right side on both a and b speaker output Before you buy anything, or spray anything, simply work the controls. You may clear a dirty potentiometer or switch simply ...

..."RCA Patch Cable 6 ft. Gold Plated" for $1.80 plus shipping.More expensive cables will not hurt anything.  But they won't help anything in your set-up.And keep them short, if you can,

...the amp suddenly died. I've changed the plug fuse and checked internal glass fuse, both ok.Cant see anything obvious I.e. burning or over heating signs inside the box but as the transformer has an ...

...you can use the good channel has a guide to the bad one. First thing is to look around see if anything does not look the same as the right channel. If nothing obvious stands out, with the power ...

...I have checked speakers etc and swapped them around and proved that only Zone 3 is outputting anything. Is this a known fault? Knot a known falt may be only run 2 zones at a ...

...the big capacitors, diodes, bridge rectifier, voltage regulator etc. Audio culprits are anything on the heat sink(s). Look for burnt, damaged parts too, anything running very hot! Follow ...

...the simple things first, hunt round for fuses near where the mains goes in. Keep on the lookout for anything that looks burned or broken. If there's no power to anything it will be something in the ...

...not go off. Ive left the unit on for some time and nothing changes. The amp is not connected to anything at the moment so there cannot be any short circuits or anything although when i originally ...

...sounds fine but the other one doesn't. Did you try to switch the loudspeakers? Before changing anything always lover the volume and switch off the amplifier. Assuming you tested already