Crown CE1000 2-Channel Amplifier "amp protect mode" Questions

amp remains in protect mode, there is a problem with the final stage of the amp. Without having the make and model, I can not provide any details at this time. Please try the unit without the speakers

amp is unusable yes,pls.stop plugging the system,you may harm your system if you do so,the system has it's own system analysis mode,and if there's something wrong in the circuitry,it will activate,you

amp in protect mode my amp keeps going into protect mode and i dont want to send it away for another month if you could help me that would be great Most time they go to protect there is something ...

...protect mode. You need a repair guy3. one or both speaker wires are touching at the amp or in your wires (low chance of this)  Disconnect the speaker wires and see if the protect mode goes ...

...Amp IC) PLEASE help!!! The protection mode is often switched on when an overload has/is happened/happening. This is caused more often than not by faulty speaker wiring or problems. It sounds to me ...

mode The Amp when connected up won't come out of PROTECTION mode.The other components all work fine when wired up to another amp.I have even tried after reset to factory settings,Anybody got any ideas

6 ohms. If you read 0, the problem is a shorted speaker that then shorted the amp. Keep us posted. Dan I have a NAD AV316 and there it still saying protect on the display. speakers not in... help plz?

...amp from protect mode? Protect mode can not be "reset". This mode means that a problem was detected in the final amp stage and the unit has been shutdown to prevent further damage. The most common ...

...Amp goes into protect mode at startup if the remote signal and the power come up together. If I bring up the remote signal after power is turned on, then it starts OK? What gives? I discovered that ...