...amp no sound 0utput it turns on but there is no sound on either channel. Before it stopped working, only one channel worked at a time. With amps loss of sound is mostly connected with the devices ...
...stopped working all together. Had a professional sound shop work on amp and after a $200.00 charge the tech said he had to re sodder the connections in channel two. Got it home...hooked it up and now ...
Question about Jamo Audio Players & Recorders
...amp for both channels. You will find this IC on the big heat sink. Check whatever is on that anyway for damage or burning. The only other area could be the pre-amp part. Again this could be a single ...
amp,will not turn on or power the other 2 amps If you have lost both channels then it's something that is common to both that has gone. If one channel has gone, use the good channel as a guide. Here's
...stopped. Sound still out of the other speakers. When looking for a solution, I notice that there is an issue with the 'A B' speaker buttons. The front speakers will not switch off. When using the ...
...amp stage by stage - prodding the parts. Remember a buzz in the right a buzz in the left! No buzz in the left but one in the right fault found! Ignore the power supply it's nothing to do with that as ...
stopped working. First it blew the speaker and now the amp channel is not working. first pull out the power transistor then biased the output terminal. base,emitter have dc volts .4 to .5 collector to
Question about Sonic Impact Technologies Audio Players & Recorders
...amp no longer works, and it stopped working after the shorted plug was installed. Could the short have caused the problem? YES! The output device on that channel will have blown. Look at the output ...
Question about Audio Players & Recorders
...amp right speaker stopped working I have a yamaha m70 amp and c70 pre-amp that was working fine now my right speaker will not work on either a or b speaker channel First, lets's determine if it's the ...
...amp; the R front channel output has stopped working. I checked the terminals & made sure that it was in Lft Rt mode,the other terminals are working fine. Check out the main semicondutors for that ...
69 questions posted
Usually answered in minutes!
68 Questions
33 Questions
21 Questions
21 Questions