fan motor will not spin blades Is blade stuck? Remove grill cover and spin the blade to see if there is a mechanical problem. If OK then check the cord for a bad connection at the plug.
...no sign of dirt or insects. Should I remove the back cover to check that area? Re-inspect both fan blades. Up top and inside. Something is out of balance on the fan
...cover on roof and observe (carefully, with breaker shut off inside) blades on condenser fan as well as blower while spinning slowly first, and look for possible bent blade on rear fan blades, or even ...
...it has been run. I took to cover off and didn't notice anything out of the ordinary. Check fan blades carefully for bent blades and also check the back of the blades. If any blades are broken
...a piece of fuzz off blade when running and my finger got caught on the fan blade it is a plastic grey cover of some sort. first rule of thumb, when working on any electrical equipment, unplug
How do i clean the blades on my lasko fan? I can't figure out how to get the cover off to clean the blades. compressed air
...cover and unloosen bolt that hold the fan to the frame or whatever it might be. After fan is out spray some WD40 that holds the fan blade to the motor shaft. Measure the distance from the fan blades ...
How come the motor seems to run but the blades wont spin I assume you are talking about the diffusion blades/louvers. If they are not moving back and forth then you have a linkage problem. You will ...
...my system. Any ideas? Hi!! Have you taken a look at it???? It sounds to me like the condenser fan blades are bent or something fell in thru the grill that the blades are hitting on. If this is the ...
...fan after taking cover off to examine. need to check and make sure the condensing fan ( outdoor unit fan) wires are not hitting the fan blade, it could also be that the fan blade needs to be
1 questions posted
Usually answered in minutes!
26 Questions
40 Questions
24 Questions
16 Questions
1 Questions