humidity sensor in my LGDLE2514W? I've already replaced one metal strip out of two from that sensor. It did not help. Thank you for your help! If the sensor was replaced but not help, the issue may be
Question about Dryers
...If used on the automatic setting, it never shuts off -- the clothes get dry and then hot. The dryer works fine on the time-cycle. Thanks Either the control board or the humidity sensor is
control... hope it helps this has been happening to our dryer of the same model for 2 years. we un-plug, plug, un-plug, plug, un-plug, plug over and over until we get the display back. sometimes it'll
sensor, control board, thermostat etc. It does seem to get really hot when drying on Autodry with High heat setting, and towels are dry long before the accudry cycle ends. Are you running the dryer in
...humidity sensor, switches (door etc.) all must function in the system to allow correct performance, lastly control panel, also most problems involve cleanlyness of the entire system and all associted ...
LG gas dryer not coming on I can tell you on the LG dryers there is indeed a "reset" for the heating/burner funnel (as you obviously know) on the right hand side of the funnel, however they also ...
Question about LG Dryers
What would cause an unusual chime when turning machine on? The machine make a strange chime when I turn it on. It never did it before. Any idea what it could be? I couldn't find anything in the manual
Control board has 4 screws and is replaced as a unit. Keep the selector knob. Removing and reversing the door Remove the screws from opposite side and then remove the latch pull out the latch no wires
Question about Kenmore Dryers
sensor controller issue. It's probably detecting the humidity and shutting off because the clothes are dry. From the manual, (which you should read) "Drying and Cycle Tips Select the correct cycle and
2 questions posted
Usually answered in minutes!
Step 2: Please assign your manual to a product: