...calibrate the new thermostat and in doing so, you will need a calibrated thermometer with sensor dipped in oil at about one (1) inch above the fryer thermostat sensing bulb. Record the cut-off temp ...
Question about Pitco Frialator Kitchen Appliances - Others
...calibrate it. Hi there Hi limit will trip at 450F. Check your thermostat setting, then check its calibration, this way you will be able to verify where the problem is. If the setting and calibration ...
Question about Pitco Frialator Kitchen Appliances - Others
Electric Pitco E14SS, how do you adjust the thermostat If you are asking about thermostat calibration, visit whttp://ww.middleby.com and go to Pitco web, you can download operations and owner's ...
Question about Imperial Kitchen Appliances - Others
how u go about increasing thermostat when recalibrating Hi there!Using a precision screw driver, turn the thermostat calibration screw counter clockwise to increase the temperature cut-in of the ...
calibrate a thermostat on a deep fryer...Is your thermostat bad? Is the temperature setting off? Is it working at all? You could call Vulcan directly and ask for the parts/warranty dept and they could
Question about Pitco Frialator Kitchen Appliances - Others
Just replaced thermopile, hi limit and thermostat and the fryer still cutting out at certain temp. Seems like when it hits 400 it will cut out. What could be the issue? Do we need to lower the temp? I
Question about Pitco Frialator Kitchen Appliances - Others
fryer smokes at 350 with new shorting and we fryed chicken at 350 and it got to done on the outside and raw on inside also the thermostat is not screwed down to the holder whats going Hi there. You ...
Question about Imperial Kitchen Appliances - Others
fryer coming on without turning thermostat on fryer will come on with thermostat at lowest setting when you tap dial fryer will go off Imperial Model: IFS-40. The thermostat is either very far out of ...
Question about Vulcan Kitchen Appliances - Others
Fryer will heat up at 350 temp setting but actual reading is 375. The problem we are having is that the fryer will heat up fine then when the burner goes of the pilot will also shut off. If however i ...
Question about Pitco Frialator Kitchen Appliances - Others
...thermostat won't calibrate. What should the resistance be at the thermostat at 350*? what should the resistance be at the thermister at 350*? I believe at 350 the probe should read 942 ohms with a ...
317 questions posted
Usually answered in minutes!
16 Questions
4 Questions
4 Questions