Stoves 720EF Electric Double Oven "wiring hob" Questions

...wiring the hob in you have disturbed the wiring for the oven. Normally the oven works off the main oven control switch on the panel and the hob could be wired into something else. Is the oven totally ...

Ignition switch on a gas hob/electric oven not sparking We have just had a new oven fitted and the oven is working fine and the hobs are working when they are lit with a match, however we have an ...

Need to hard wire a stoves 720 EF to existing 6mm feed to electric hob can I run both oven and hob out of the one feed using a junction box No. They need to be separate circuits.

do all neff oven & hobs have to wired in using 6mm cable or can they be wired into a13 amp system If it is a single oven on it's own then it can be used from a 13 amp plug and socket, the same ...

I was using the hob today and then realised it had stopped heating up. I have replaced the fuse but this has not worked. Any idease? Is the hob plugged into a normal 3 point plug do you know? If so it

Have a neff t1213xo, what does black grey and brown wires stand for? You have an hob with European three phase at 220volt mains wire connected. You need to to disconnect from mains connection box on ...

hob work but if you change the wiring over to the other small part I believe it's called a link three hobs and the grill work. Someone mentioned that it may have been wired incorrectly. Please can you

What is the worst that could happen if an electric double oven ceramic hob had the neutral and earth mains power wired the wrong way round ? Now wired right way round. Both Oven lights are on when ...

...hob specialist for a more technical repair job? Many thanks. tony call the technician for a proper diagnosis amn quote unless the electrician doing the wiring altered the circuit to the unit , there ...

...hob, unless you know which blows the mcb, check all connectings to see thay are secure, work round the hab reostates, make sure there is no shorts to ground from elements, with temp control down at ...