SB-600 display shows, but will not fire or test fire Same as above, my SB-600 turns on, but does not fire or test fire, does not make the charging hum. there's a part in inside that triggers the light
firing batteries are good will not work on or off camera meter appears to read (red light goes on) but no flash???!!! help virtually brand new, wsell taken care of flash flash bulb could be burnt out.
canon flash speedlite 550 ex ttl burning smell when i fire in manual, in auto seeing to be ok Send the flash back to canon for Service this is not something that can be fixed in this forum. Do not use
...firing early or late... SO... I set both the faulty sSB800 and a new SB900 (WAY too expensive) in slave mode-BOTH of them on tripods and OFF the hotshoe on the camera). I took some photos and my eyes ...
...batterys and the LCD Light works and the Txt shows up, did you work out the problem and also how to fix it? thanks rick email [email protected] hi ,were you able to fix the flash ? what was the ...
...firing. the display is on, pushing the ''TEST/CHARGE'' button gives not response except one of the LED's on the quantum battery, the last one from the end, dims slightly as the TEST button is pushed. ...
...hot-shoe is not connected all the way on the camera? Send back to Ikelite, if it's bad they will fix or replace. Ikelite 50 W 33rd St. Indianapolis, IN 46208 ...
...test/charge button. What is wrong with the flash? My flash does the same, let me know if you find a ...
...firing the flash is ok. If not there is open connection in the sync jack ,due to repeated inserting of sync chord.The springy part inside is not going back to its normal position. You can fix it your ...
...knowledge of the unit itself. Return it to Bogenimaging.us service department and they will fix
53 questions posted
Usually answered in minutes!
1,383 Questions
944 Questions
808 Questions
687 Questions
597 Questions
