Crown XTi 4000 Amplifier "peavey fuse" Questions

what size fuse peavey XM-6 I need to know what size fuse for a peavey XM-6 300 H series I need to replace Fuse is 5 A for 120 VAC and 2.5 A for 220-230 VAC, usually 5 x 20 mm.

peavey amp XRD 680 wont power up. The fuse was changed.. still didnt power up put in new fuse.. it came on then went off When it goes off does it go into protect or just shuts down?

peavey XRD 680 wont power up i changed the fuse it cam on for a second then went off. I changed tonew fuses it didnt power up Fuses blow because of an overload. Generally caused by a short circuit ...

...power. Now it won't turn on at all. Any suggestions would be greatly appreciated. Thanks! Hi.... Peavey puts many of their fuses on the main curcuit board inside the amp...I work on peaveys alot ...

I HAVE A PEAVEY AMP, BUT I CAN'T GET THE POWER TO COME ON PEAVEY are very durable check for fuse

Peavey valveking 212 - fuse 203 blown, found two of the +14v/HTR rectifier diodes blown. Have replaced these and the fuse - now have power but low volume on clean, nothing at all on distortion Hi, are

...Peavey Classic 212 Guitar amp , Has NO SOUND , I changed the tubes , I checked the panel board for loose connections, Checked the speakers, still no sound. It powers up , but no sound comes the ...

...Peavey KB 300 keyboard amp's 15" speaker stopped working. The horn speaker still works. The only fuse I found inside is still good. Any suggestions? Hi there. You have have been unfortunate enough to ...

Peavey TNT 160 has no response from both inputs, only preamp in Got given a TNT 160, guy said it only needed a fuse, I replaced the fuses and it powers up but only the preamp input produces any sound.

...Also blows thermister on Peavey crossover and sometimes fuse. If you're using a microphone it's feedback, duh. How to Eliminate Feedback ...