Question about NAD Audio Players & Recorders
...amp is switched off, disconnect the speakers and switch left to right and right to the left output.. If the other speaker is quiet now, you are sure it is in the amp. Still his can be anything. You ...
...amp to my speakers will this work. Hi juicer, If you use the switched outlet, then everything will be turned on/off when you operate the preamp power switch. Use the unswitched, then you have to turn ...
amp to work) Thanks! Hi, i would try flooding trhe switch with CRC 2-26 for a start. Itr may recover some contact integrity. A jerry rig solution would be to bridge the switch contacts and leave it on
...Switch speaker wires if sound switches then amp probably has a final amp ic.output problem. Try balance control and tape dubbing or loudness buttons to see if any are dirty.May have to get repairs at ...
...switch on my system(amp, CD, TAPE DECK, DAB tuner and analogue tuner) as soon as the amp has warmed up (3-4 seconds) within 1/2 a second of sound coming from the speakers, the amp cuts out. The amp ...
...amp, the standby power switch doesnt cut off, on presseing the power button. amp stays in stand by mode. unable to do anything about it. finally left it plugged on to a power source in case the ...
...turns the power amp on and off. I would connect it to +ve12v via a switch on the control panel of the boat. Turn on the switch when you want to use the amp. Good luck and happy punting! regards ...
...switch amp on you hear a click & the display registering music being played from cd player these lights are moving up & down as normal. But most of the time it wont make that click & so ...
...Amp My question is: The on/off switch is very hard to turn!!!Almost need pliers to turn it, Well, My buddy used the pliers I think!!, Well, now only 1 channel or 1 speaker is playing, the other ...
30 questions posted
Usually answered in minutes!
62 Questions
68 Questions
33 Questions
21 Questions