Question about Audio Players & Recorders
poineer deck amplifier dc-z74 relays click but set deck does not come on no display lights dead unit only red led and relay sound but the deck does not come on its a dead unit nor poineer deck ...
Kenwood BB5 Hello All, I have a Kenwood BB5. Power on and the relays click, click click. its the 3 relays on the left of the board. i tried to isolate the relays by removing them off one by one and ...
Question about NAD Audio Players & Recorders
Your receiver has a condition known as DC Offset, meaning you have a damaged amplifier. That second relay click, that you don't hear now, is the speaker protection relay not closing, due to the damage
...relay clicking, but not sure it is staying closed. I am guessing, but I assume the relay is normally open, and that when you either physically press on, or hit the power button on the remote, it ...
Question about Audio Players & Recorders
relay clicking about 4 times in a row. then the message ''turn off power appears. Suggestions? Disconnect the speakers and try it again. Come back with results. It's trying to tell you there's a short
Question about NAD Audio Players & Recorders
...selected, for 30-60 seconds When switching on amp in the morning after overnight shutdown, only one relay click heard, and no sound. 30-60 seconds after this, another relay heard to click and sound ...
Question about Audio Players & Recorders
...no apparent reason. One thing you could look at is that thing that makes the click, it could be a relay and they do go wacky sometimes (hence why it shuts down). If you are lucky it will tell you ...
...just one red light is on. Thanks The click you hear is most likely the speaker protection circuit relay due to the protection circuits being triggered. In the event of a dc voltage appearing across ...
Question about QSC Audio Players & Recorders
peavey cs800x a channel drive board what goes bad? I have a peavey cs800x A channel didn't work, relay didn't click.no power light .I swapped the drive boards,and now A channel works,but B relay doesn
amp relay won't activate pioneer sa9500II when I turn it on, relay won't click...anything obvious? that's a short you have on your sound card has to review the IC
39 questions posted
Usually answered in minutes!
62 Questions
68 Questions
21 Questions
21 Questions