...fuse 120a my fuse 120a which controls everything is blown because when trying to charge the battery the current was switched. I have purchase a new fuse to replace it but I can't remove the old one. ...
...120a main fuse mazda I removed the 120a fuse, and I could retrieve one 10mm bolt that was behind the fuse box, the other is stuck behind a metal bracket, I was wondering how to get behind this metal ...
...Fuse 20 (120A) Hope this helps. Hi there, The main fuse link is usually inline with the + battery cable (red). Usually situated somewhere on the cable itself. The Odyssey will also have a MAIN FUSE ...
120A main fuse in my 2005 Mazda Atenza? disconnect the battery , the 120 amp fuse is a complete unit that is housed in a plastic case, that needs to be pulled out , it will be very tight and may break
the Battery fuse, which is 120A? The fuse that needs to be replaced is the one that has an open area in it that you can see when it is remove,shound be a solid piece of wire from one side to the other
...120A fuse and the car started working again. I thought my problem was over but after a week the problem came back and now is not the 120A fuse, it seems that the problem is after the fuse. another ...
I have a blown 120a fuse link in my 2004 toyota camry that needs replacement Wow , that is a big one.
How do I remove and replace the 120A main fuse in my 2005 Mazda Atenza? Should be under the hood in plastic box
...fuse." It is usually white or black ( 80 - 120A). To replace it on most Mazda's you have to partially disassemble the under hood fuse box to remove the 2 bolts holding it into the car, but this is ...
259 questions posted
Usually answered in minutes!
104 Questions
74 Questions