2003 Toyota Sienna "looking light bulb 2005" Questions

...bulb and the third brake light works what is it? have you checked the earthing continuity-if it's this other bulbs may also partly light when brakes used otherwise- Check continuity of live from ...

...bulb? Please advise. Thanks!! Hi - I just replaced my left rear brake light on my 2005 Sienna. I followed the manual directions and removed the two metal bolts from the tail light cover. However the ...

...lites under the hood...the base of the light should simply twist to the left and pull....there are notches that tabs will slip thru....the base and the bulb will come out....the bulbs simply plug ...

...light assembly, look for the low-beam bulb, these bulbs are which operate when you turn on your headlights. check modifiedlife.com for the correct size of the bulb. then simply put your hand in and ...

I have a 2005 GMC Canyon pick up. My left rear turn signal will not flash. All of the bulbs are good. All of the other lights work...ie rear break lights and back up lights. What could it be? I Have ...

...light bulb issue rsx type s acura 05-06 I have a 2005 Acura Rsx type s and i bought it without low beam light bulbs and i try to find the one's that fits into that 3 prong socket.Acura says it needs ...

...light REPLACING THE BULB IS EASY. OPEN THE LIFT GATE, LOOK TO THE SIDE THAT YOU ARE REPLACING. RIGHT BESIDE THE TAIL LIGHT THE ARE TWO SCREWS. REMOVE THEM AND TAIL LIGHT SHOULD JUST PULL OUT. MAKE ...

...light assembly off, the bulb looks good, and cleaned all of the contacts and it still does it. Could it be the break pedal switch? I did not try to remove the led lights or clean them. It is the LED ...

...Then reach in behind the grill and turn the light socket counter clockwise and pull it out. Then unclip and disconnect the light bulb from the socket. Reverse procedure to install the new light

...bulb or whole light assembly. Both are easy, the bulb has a slotted lock. turn the bulb to the left and it should come out. The assembly, under the front bumper, look at the light housing. There ...